Showing 1–12 of 221 results

Show sidebar
Show 9 12 18 24
Compare

4 Circuit Audio Expander

Each ECS-125W Amplifier is capable of producing 125-watts of audio power. Up to eight ECS-125Ws can be used on the
Add to wishlist
Quick view
Compare

Adjustable Type Hose Nozzle

  • Available sizes: 1 ½ and 2 ½ inch.
  • Adjustable fog, straight stream and shut off
  • Finish: Brass and Chrome
  • Thread: NST
  • NST to BS336 male adaptor available if required.
  • Nozzle pressure: 100 psi
  • Discharge GPM as in UL listing
Add to wishlist
Quick view
Compare

Angle Hose Valve

, ,
Working Pressure 300 PSI Angle hose valve manufactured in accordance with UL668 Hose valve fire protection service is used as fire department outlet or with a hose rack assembly. Available in size 11/2 ” & 21/2 “
Add to wishlist
Quick view
Compare

ECS-DUAL50W Intelligent Amplifier

Features & Benefits:
  • Amplifier is compatible as:
  • 50 watts with 50 watts as backup.
  • 100 watt single channel.
  • 100 watt single channel with 50 watts backup using ECS-50WBU.
  • Dual channel using 50 watts for each channel (IFP2000ECS only).
  • Dual channel 50 watts each channel with 50 watts backup using ECS-50WBU.
  • Up to 16 amplifiers per IFP-2000ECS system for a maximum of 1600 watts.
  • Distributed between up to 128 audio circuits.
  • Built in backup amplifier test feature allows you to physically
  • test that the backup amplifers are operating properly.
  • Up to eight amplifiers per IFP-100ECS and IFP-1000ECS for a maximum of 1000 watts.
  • Distributed between up to 64 audio circuits.
  • The ECS-DUAL50W has it’s own power supply and backup battery.
  • Six-wire connection to ECS system: Two-wires for the voice bus and four-wires for the SBUS connections.
  • Amplifier Bandwidth 400 Hz to 4000 Hz.
  • Can be mounted up to 6000 feet away from ECS-Series control panel.
  • 120 VAC or 240 VAC operation.
  • UL 864 and UL 2572
  • UL listed for 520Hz signaling when used with compatible speakers. See IFP-100ECS, IFP-1000ECS or IFP-2000ECS Installation manuals for list of compatible speakers.
Certifications:
  • NFPA 13
  • NFPA 70
  • NFPA 72
  • UL 2572
  • UL 1711
  • UL 864
  • UL Listing
  • CSFM
  • MEA (pending)
Add to wishlist
Quick view
Compare

Farenhyt Series Smoke Detector

Features & Benefits:
  • New modern profile for improved aesthetics
  • Stable communication technique with noise immunity
  • Low standby current
  • Two-wire SLC connection
  • Remote test feature from the panel
  • Expanded color options
  • SEMS screws for wiring of the separate base
Certifications:
  • UL listed: S6173
  • FM approved
  • CSFM: 7272-0559:0512
Add to wishlist
Quick view
Compare

Fire Hose Reel

, ,
  • Easy to install
  • Simple and compact
  • Light to handle
  • Automatic or manual operation
  • Hose available in red or black color
  • Choice of two sizes 25mm & 19mm
Add to wishlist
Quick view
Compare

Hose Rack & Hose Rack Assembly

  • Fire Hose Rack model is manufactured with standard Thickness of 1.5 mm.
  • Hose Rack Assembly is available with 1 1/2″ inlet with Maximum Service Pressure 175 PSIG Standard and 150 PSIG Optional.
Add to wishlist
Quick view
Compare

IDP Plug-In Thermal Detector

Features & Benefits:
  • Sleek, low-profile design
  • Reliable analog communications for trouble-free operation
  • Age resistant polymer housing
  • Innovative thermistor sensing circuit
  • Superior EMI resistance for reliability
  • Variety of mounting options to meet any application; tamper-proof feature available on mounting bases
  • Dual LED indicators for 360º visibility
  • Detector transmits signal to indicate maintenance is required
  • Optional remote LED annunciator (PN SSRA400Z; PN RA400Z)
  • Rotary address switches for fast installation
Certifications:
  • UL Listed
  • MEA
Add to wishlist
Quick view
Compare

IDP-FIRE-CO Multi CriteriaFire/CO Detector

Features & Benefits:
  • Unique ability to detect all four major elements of a fire: - Smoke - Carbon Monoxide (CO) - Light/flame - Heat
  • Separate CO detection signal
  • Highest nuisance alarm immunity
  • Automatic drift compensation of smoke sensor and CO cell
  • Uses only one address on the SLC
  • Real Test ® CO testing capability
  • UL 268 and UL 2075 listed
  • Separates audible signal for fire or CO alarm when used with B200S base
  • CO cell end-of-life warning and fault
Certifications:
  • P/N 351182
  • P/N 351180 Rev D Copyright
Add to wishlist
Quick view
Compare

IDP-PHOTO Intelligent Photoelectric Smoke/Thermal Detector

Features & Benefits:
  • Sleek, low-profile design
  • Reliable analog communications for trouble-free operation
  • Age resistant polymer housing
  • Superior EMI resistance for reliability
  • Simple field cleaning for code compliance
  • Dual LED indicators for 360º visibility
  • Detector transmits signal to indicate maintenance is required
  • Tamper-proof feature available on mounting bases
  • Listed for use in duct applications
  • Rotary address switches for fast installation
Certifications:
  • UL
  • MEA
  • CSFM
Add to wishlist
Quick view
Compare

IFP-2100 Fire Alarm Control Panel

Features & Benefits:
  • Network support for up to 32 Sites
  • Built-in support for up to 159 IDP/SK detectors and 159 IDP/SK modules or 127 SD SLC devices
  • Four programmable function keys
  • Four line LCD display with 40 characters per line
  • Available in a red or black cabinet
Certifications:
  • NFPA 13, NFPA 15, NFPA 16, NFPA 70, & NFPA 72
  • UL Listing; CSFM (pending)
  • COA (pending)
  • OSHPD (CA) (pending), FM (pending)
Add to wishlist
Quick view
Compare

IFP-75 Intelligent Fire Alarm Control Panel

Features & Benefits:
  • Network support for up to 32 Sites
  • Built-in support for up to 75 IDP/SK detectors and 75 IDP/SK modules or 75 SD SLC devices
  • Four-line LCD display with 40 characters per line
  • Available in a red or black cabinet
  • Can be surface or flush mounted
  • Built-in USB interface for convenient and quick programming
  • Programmable date setting for Daylight Saving Time
  • JumpStart auto programming feature for easy programming
  • Built-in dual phone line, digital alarm communicator/ transmitter (DACT) with IP and optional cellular technologies
  • Network card allows copper network connection with a multi-mode or single-mode fiber connection option
  • Convenient field-upgradeable firmware
  • Supports up to four SWIFT wireless gateways. Each gateway can have up to 49 wireless devices
  • Supports Class B (Style 4) and Class A (Style 6 or Style 7 configuration for SLC, and SBUS
  • Built-in NAC synchronization for EFJWDFT from AMSECO, Gentex, System Sensor, and Wheelock
  • Reports events to central station by point or by zone
Certifications:
  • NFPA 13
  • NFPA 15
  • NFPA 16
  • NFPA 70
  • NFPA 72
  • UL Listed: S2766
  • CSFM: 7165-0559:0503
  • FDNY COA# 6248
Add to wishlist
Quick view