Play Video
VIDEO PROFILE
SAFE YOUR LIFE
We want to be number 1 in the world by providing innovative solutions in the field of protecting life, the environment and property
Find The Best Solution For Your Needs
We design and manufacture systems and products you can trust, made for a multitude of sectors to a high technological standard
To create a safer world!
We design, create, implement, optimize and maintain technologies that protect people’s lives and safety.
Search By Company
Products By Categories
Featured Products
iRIS8
| Main Power Supply | 110÷230VAC,50÷60 Hz, 2x200W |
| Back-up Power Supply- lead batteries one in the main block + one in the Block expander | 12V/ 18Ah |
| Nominally internal battery resistance | <0,3Ohm |
| Storage Temperature | -10˚C to +60˚C |
| Operating temperature | -5°C to +40°C |
| Dust and moisture protection | IP30 |
| Relative Humidity (without condense) | up to 95% |
| Dimensions | 430/330/120mm |
| Weight | Min. configuration 7kg/ Max. configuration 15kg (without battery) |
1 zone fire alarm control panel
Food Processor Model Number: Eagle 1
Features
1 Fixed Zones
Supports up to 32 Detectors
Unlimited Contact Points
1 “Fire” and 1 “Fault” relay outputs 1 Monitored safer
outputs Active EOL allowing continuous monitoring of inputs Walk test LED indicator Access levels Protected by a security key, a plastic box, Abdulaziz Street Company, only for 599
SFFECO-227 system
SFFECO227 - UL /FM Fire Extinguishing System
We have been in the industry for over decades and our fire extinguishing and suppression systems have a presence in over 100 countries with a strategic network of dealers and distributers. SFFECO 227 Clean Agent Suppression System is one of the most echo friendly system which suppress fire by physically cooling flame through removing heat energy, and interruption the combustion reaction to an extent that cannot sustain itself.
The 227 system gives a safe fire safety to people, life stock and assets by utilizing UL & FM certified HFC-227ea clean agent gas. The biggest challenge in using suppression agents that are eco-friendly as sometimes the fumes that are produced during fighting fire can affect the ozone layer, however SFFECO 227 clean agent system is completely echo friendly and is a non-ozone depleting firefighting suppression agent.
- Engineered System Cylinder Range: 20 lbs to 1200 lbs
- Pre-Engineered System Cylinder Range: 3 lbs to 540 lbs
- Available in Pneumatic, Mechanical and Electrical Actuation
- UL Listed and FM Approved system using UL & FM Approved Clean Agent
Dry Barrel Fire Hydrant
Model No.: LF-FM1510A / LF-FM1510B
Features
- 4.5” Pumper nozzle, (2) 2.5” Hose nozzle, NH Thread, other thread types available (4” Pumper Connection is optional)
- Multiple bury lengths available
- Specify mechanical joint or flanged shoe at time of order
- 250PSI Working pressure
- -10°C to 82°C Working temperature
- Internally and externally liquid epoxy painted corrosion protection
Portable dry powder fire extinguishers
| Model | PD1 | PD2 | PD6 | PD10 | PD12 | PDB5 | PDB10 |
|---|---|---|---|---|---|---|---|
| Capacity | 1 Kg | 2 Kg | 6 Kg | 10 Kg | 12 Kg | 5 Lbs | 10 Lbs |
| Effective Range | 4 m | 4 m | 6.5 m | 8.5 m | 8.5 m | 4 m | 5.5 m |
| Discharge Duration | 6-10 Sec | 6-10 Sec | 10-14 Sec | 14-22 Sec | 14-22 Sec | 6-10 Sec | 8-11 Sec |
| Working Pressure | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 |
EDJ Type – Standard Pumps
| Flow (GPM) | Skid Width (mm) | Skid Height (mm) | Skid Length (mm) | Diesel Engine (HP) | Motor (HP) | Jockey (HP/GPM) | Header Pipe |
|---|---|---|---|---|---|---|---|
| 50 | 650 | 1250 | 1230 | 8 | 5.5 | 3 / 10 | 2" |
| 120 / 150 | 1220 | 1300 | 1220 | 15 | 15 | 3 / 10 | 2.5" |
| 250 / 300 | 1220 | 1420 | 1220 | 25 | 30 | 3 / 15 | 4" |
| 350 | 1550 | 1630 | 1600 | 40 | 40 | 3 / 20 | 4" |
| 500 | 1600 | 1420 | 1800 | 60 | 50 | 5.5 / 25 | 6" |
| 750 | 1700 | 1300 | 1800 | 85 | 75 | 5.5 / 35 | 6" |
| 1000 | 1700 | 1250 | 2000 | 100 | 100 |
Fire doors and frames
Fire doors and frames
As part of our continuous pursuit of innovation, SFFECO has launched its world-class fire rated doors and frames. The fire doors and frames are manufactured in a fully automated factory using CNC machines thus ensuring uniform quality and a great finish. SFFECO fire doors are manufactured to comply with various architectural requirements. These doors are designed for areas where strength, stability and durability are priorities. Typical applications include industrial building entrances, shop service doors, basement floors, stairwells, and elevator shafts. It is also widely used as partition or exterior doors in electrical and petrochemical plants. The door or frame can be made of cold rolled steel, galvanized steel or stainless steel. Doors can be used in drywall and masonry construction.
Wet barrel fire hydrant
DESCRIPTION MATERIALS SPECIFICATIONS Model
LF-WBHX-115 / LF-WBHX-100
Faucet, Wet Barrel Type, 6" Diameter Made of Ductile Iron, with
Single 4.5" Pump Connection (4" Pump Connection Optional
). 2.5" Thread Hose Outlet Connections and Connectors
, AWWA C503, Flangeless 4" Display, UL\FM
Approved, LIFECO
Model LF-WBHM-115 / LF-WBHM-100
Faucet, Wet Barrel Type, 6" Diameter Made of Ductile Iron, With
Single Pump Connection 4.5” (4″ Pump Connection
Optional) Thread and Hose Outlet Connections 2.5”
Thread, AWWA C503, With Only 4” Flange Display, UL\FM
Approved, LIFECO
Features
Strong Ductile Iron Material for Long Service Life
Pressure Rating Higher at 250psi and 2 times
the 500psi test pressure
• Choice of multiple hose nozzles
• Internal and external fusion bonded epoxy coating
• FM approved and UL Listed for use in
fire protection application
• Observation flange available for additional hardware
Technical Specifications
• Design Standard: FM1511 / UL246 / AWWA C503
• Nozzle Thread Standard: NFPA1963
• Pressure Working: 250 psi
• Inlet Flange Connection in ANSI Class 125/150 6"
BS EN 1092-2PN110 / 16 6”
• Observation Flange Connection in ANSI Class125/150 4”
• Hose Nozzle: 2.5″ * 2
• Nozzle Pump: 4.5” * 1 (4” pump connection optional)
• Monitor Flange Connection 2H1PM: ANSI Class125 / 1504 “
BS EN 1092-2 PN10 / 16 4”
• Inlet Flange Connection: ANSI CIass125 / 150 6”
BS EN1092-2 PN10/16 6”
Component Material No.
1 Hydrant Body 65-45-12
2 Steel Wire Rope
3 0 EPDM Ring
4 Fire Engine Nozzle Cap 65-45-12
SS304 Plastic Coated
5 Fire Engine Nozzle C84400
6 Fire Engine Nozzle EPDM Gasket
7 4.5” Gland C F8
8 Inner Flat Angle Set Six Corners Spoiled A 2 9 4.5” EPDM Sealing Ring Disc
10 Disc 4.5” CF8 11 55304/55420 12 Fixed Nut CF8 13 Inner Six Cylinder Angles Head Cover A2.70 14 C84400 15 C & 8 16 Hex Nuts 4.5” Shaft Nut A2.70 17 Hose Nozzle Cap Run Nut
Fire End Security and Safety Systems