Pressure Relief Valve
- Pressure Relief Valve: Limits pipe line pressure by release excess pressure
- Pressure sustaining: Prevents pipe line pressure from rising to a maximum value
- Operates over a wide flow range
- Inlet pressure adjustment range: 65-180psi
- Can be maintained without removal from the pipe line
- Flanged to EN1092-2 PN10/PN16, ANSI B16.1 Class 150 FF (Other available on request)
- Grooved ends to AWWA C606 Standard
- Rated Working Pressure: 300 psi
- Adjustment Range of Set Pressure: 65 to 180 psi
- Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard.
Description
Attachment
Related products
Matrix Network Vision Anchor
Matrix Network Vision Anchor
The large, full-color graphic display with touch screen functionality provides fire alarm system status information to single or multiple locations. Matrix Vision Annunciator can be configured to provide full display and control to replicate fire control panel functionality or to act as a simple display device for applications where access to fire alarm system control is inconvenient.
1 zone fire alarm control panel
Food Processor Model Number: Eagle 1
Features
1 Fixed Zones
Supports up to 32 Detectors
Unlimited Contact Points
1 “Fire” and 1 “Fault” relay outputs 1 Monitored safer
outputs Active EOL allowing continuous monitoring of inputs Walk test LED indicator Access levels Protected by a security key, a plastic box, Abdulaziz Street Company, only for 599
Manual Call Point
Operating voltage 9 ÷ 30 VDC
Nominal operating
voltage 24 VDC
Current consumption in
alarm state
23mA/15V; 38mA/24V;
48mA/30V
Installation wires 0,4mm2 ÷ 2.0mm2
Operation temperature -10°C ÷ +60°C
Relative humidity ≤93% @ +40°C
Type of the frangible
element A
Material (plastic), Color ABS, red
Degree of protection IP40
Dimensions (incl. base) 90x57x90mm
Photoelectric smoke detector
Model No.: LE-SOC-24V
Features
Computer Designed Non-directional Smoke Chamber
360° View of Detector Case
Low Profile, 1.8" Height (with Base)
2 or 4 Wire Base Compatibility, Relay Bases Available
Very Stable Operation, RF/
Standby Current Transient Protection Low, 59μA at 24VDC
Two Built-in Power/Sensitivity Lights for Supervision/Alarm
The automatic sensitivity window check function meets the requirements specified in NFPA 72, Chapters 2 and 7, Inspection, Testing, and Maintenance.