| Operating Voltage Range | 15 – 32VDC (Nom. 27VDC) |
| Nominal consumption (stand-by) | <500μА@27VDC |
| Wire Gauge for terminals | 2.5mm² |
| Operating temperature | -10°C to +50°C |
| Protection | IP43C (mounted on B124) IP65 (mounted on WSB IP65) |
| Weight | 183g |
| Dimensions (without base) | 116x55mm |
*Depends on the selected sound type. The main tone type is 27 – the detailed description of the tone types is presented in the installation manual.
| Power Supply: From the panel External power supply unit | AUX/GND (24±4)VDC |
| Maximum power consumption | 0.11A |
| Communication | RS 485 |
| Twisted pair cable UTP CAT 5: Maximum length between repeater and panel Cross Section | max. 1000m 0.5-2.5mm2 |
| Degree of protection | IP40 |
| Color, Material | Grey, ABS |
| Operation temperature | -5ºС up to +40ºC |
| Relative humidity | up to 95% (without condense) |
| Storage temperature | -10ºС up to |
| Operating Voltage Range | 15 – 32VDC |
| Nominal consumption during communication | 220μA |
| Relay Parameters | 4A/ 250VAC; 3A/ 30VDC |
| Max. current consumption in STAND-BY mode | 175μA@27VDC |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP40 |
| Weight | ~230g |
| Dimensions | 142x80x45 mm |
| Operating Voltage Range | 15-32VDC (Nom. 27VDC) |
| Consumption in quiescent state, no communication | < 130μA@27VDC |
| Consumption in quiescent state, with communication | < 180μA@27VDC |
| Consumption in alarm state, with communication | 6.5mA |
| Output in alarm state at terminal RI (terminals 4/ 1) | 7.5 mA (max)/ 7.5V |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +65°C |
| Protection | IP30 |
| Weight (including base) | ~110g |
| Dimensions (including base) | 103x42mm |
| Operating Voltage Range | 15 – 32VDC (Nom. 27VDC) |
| Consumption in quiescent state | < 160μA@27VDC |
| Consumption in alarm state, with communication | 6.5mA |
| Output in alarm state at terminal RI (terminals 4/ 1) | 7.5 mA (max)/ 7.5V |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP30 |
| Weight (including base) | ~125g |
| Dimensions (including base) | 103x42mm |
| Power supply | 24VDC |
| Power consumption | <3W |
| Protection against electric shock: | Class III |
| Power connection | hard wired |
| Alarm threshold | 10%LEL |
| Alarms sound level | ≥ 85dB |
| Sensor type | catalytic |
| Sensor lifetime | 5 years |
| Detected gases | LPG/CH4 (Methane) |
| Enclosure color | White |
| Heating-up time | 30 sec |
| Size | 130х96х38mm |
| Weight | 0,200kg |
| Operating Voltage Range | 15 – 32VDC (Nom. 27VDC) |
| Consumption in quiescent state | < 160μA@27VDC |
| Consumption in alarm state, with communication | 6.5mA |
| Output in alarm state at terminal RI (terminals 4/ 1) | 7.5 mA (max)/ 7.5V |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP30 |
| Weight (including base) | ~125g |
| Dimensions (including base) | 103x42mm |
