| Operating Voltage Range | 15 – 32VDC (Nom. 27VDC) |
| Nominal consumption (stand-by) | <500μА@27VDC |
| Wire Gauge for terminals | 2.5mm² |
| Operating temperature | -10°C to +50°C |
| Protection | IP43C (mounted on B124) IP65 (mounted on WSB IP65) |
| Weight | 183g |
| Dimensions (without base) | 116x55mm |
Description
Selectable sound level – LOW (82-92dB)* and HIGH (100-103dB)*
32 sound types selectable from the panel
Piezo sounder
Loop synchronization
Loop powered
Plastic case
EN54 – 3 certified
Version with built-in isolator available – SensoIRIS WSOU IS
*Depends on the selected sound type. The main tone type is 27 – the detailed description of the tone types is presented in the installation manual.
| Main Power Supply | 110÷230VAC,50÷60 Hz, 2x200W |
| Back-up Power Supply- lead batteries one in the main block + one in the Block expander | 12V/ 18Ah |
| Nominally internal battery resistance | <0,3Ohm |
| Storage Temperature | -10˚C to +60˚C |
| Operating temperature | -5°C to +40°C |
| Dust and moisture protection | IP30 |
| Relative Humidity (without condense) | up to 95% |
| Dimensions | 430/330/120mm |
| Weight | Min. configuration 7kg/ Max. configuration 15kg (without battery) |
| Operating Voltage Range | 16 – 32VDC |
| Consumption, stand-by mode | 235μA@27VDC |
| Outputs, electrical characteristics (max.) | DC 30V/1A; AC 125V/0.5A |
| Consumption, 1 LED on | 3.5 mA |
| Consumption, 2 LEDs on | 7 mA |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP21C |
| Weight | ~230g |
| Dimensions | 142x80x45 mm |
| Operating Voltage Range | 15 – 32VDC (Nom. 27VDC) |
| Consumption in quiescent state | < 160μA@27VDC |
| Consumption in alarm state, with communication | 6.5mA |
| Output in alarm state at terminal RI (terminals 4/ 1) | 7.5 mA (max)/ 7.5V |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP30 |
| Weight (including base) | ~125g |
| Dimensions (including base) | 103x42mm |
