Description
- Up to 4 loops, loop card expandable
- Up to 250 devices per loop, 1000 total
- Double address detection and localization
- Short circuit detection and localization
- Loop break detection
IRIS8 Loop Extension
| Main Power Supply | 110÷230VAC, 200W |
| Frequency | 50÷60 Hz |
| Back-up Power Supply
Sealed lead-acid type |
12V/18Ah |
| Internal battery resistance | <0,3Ohm |
| Storage Temperature | -10˚C to +60˚C |
| Operating temperature | -5°C to +40°C |
| IP | 30 |
| Relative Humidity
(without condense) |
up to 95% |
| Dimensions | 430/330/120mm |
| Weight | 7kg (without battery) |
Description
Attachment
Related products
SensoIRIS MOUT-240
| Operating Voltage Range | 15 – 32VDC |
| Nominal consumption during communication | 220μA |
| Relay Parameters | 4A/ 250VAC; 3A/ 30VDC |
| Max. current consumption in STAND-BY mode | 175μA@27VDC |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP40 |
| Weight | ~230g |
| Dimensions | 142x80x45 mm |
Gas extinguishing panel
Model Number: LF/EX
Attributes
Solid steel powder-coated cabinet
Built-in battery and internal charger
System status indicator
Charge & error indicators. Battery failure
Alarm circuits monitored for both open and short circuit
Manual trigger switch on front
2 monitored detection zones
Gas release
knockout monitored on top and bottom sides for easy installation
Communication relay
Control switch Release
timer
Temperature Fire Alarm Detector
Application
The F10 is suitable for environments, where sudden large temperature changes are considered as normal, rooms with high concentration of vaporous, exhaust gases, dust, etc. For example: kitchens, garages, boiler rooms or other places where it is not convenient to install fire alarm optical smoke detectors.
Photoelectric smoke detector
Model No.: LE-SOC-24V
Features
Computer Designed Non-directional Smoke Chamber
360° View of Detector Case
Low Profile, 1.8" Height (with Base)
2 or 4 Wire Base Compatibility, Relay Bases Available
Very Stable Operation, RF/
Standby Current Transient Protection Low, 59μA at 24VDC
Two Built-in Power/Sensitivity Lights for Supervision/Alarm
The automatic sensitivity window check function meets the requirements specified in NFPA 72, Chapters 2 and 7, Inspection, Testing, and Maintenance.
