Description
- Up to 4 loops, loop card expandable
- Up to 250 devices per loop, 1000 total
- Double address detection and localization
- Short circuit detection and localization
- Loop break detection
IRIS8 Loop Extension
| Main Power Supply | 110÷230VAC, 200W |
| Frequency | 50÷60 Hz |
| Back-up Power Supply
Sealed lead-acid type |
12V/18Ah |
| Internal battery resistance | <0,3Ohm |
| Storage Temperature | -10˚C to +60˚C |
| Operating temperature | -5°C to +40°C |
| IP | 30 |
| Relative Humidity
(without condense) |
up to 95% |
| Dimensions | 430/330/120mm |
| Weight | 7kg (without battery) |
Description
Attachment
Related products
Repeater TFT IRIS/SIMPO
| Power Supply: From the panel External power supply unit | AUX/GND (24±4)VDC |
| Maximum power consumption | 0.11A |
| Communication | RS 485 |
| Twisted pair cable UTP CAT 5: Maximum length between repeater and panel Cross Section | max. 1000m 0.5-2.5mm2 |
| Degree of protection | IP40 |
| Color, Material | Grey, ABS |
| Operation temperature | -5ºС up to +40ºC |
| Relative humidity | up to 95% (without condense) |
| Storage temperature | -10ºС up to |
1 zone fire alarm control panel
Food Processor Model Number: Eagle 1
Features
1 Fixed Zones
Supports up to 32 Detectors
Unlimited Contact Points
1 “Fire” and 1 “Fault” relay outputs 1 Monitored safer
outputs Active EOL allowing continuous monitoring of inputs Walk test LED indicator Access levels Protected by a security key, a plastic box, Abdulaziz Street Company, only for 599
Gas extinguishing panel
Model Number: LF/EX
Attributes
Solid steel powder-coated cabinet
Built-in battery and internal charger
System status indicator
Charge & error indicators. Battery failure
Alarm circuits monitored for both open and short circuit
Manual trigger switch on front
2 monitored detection zones
Gas release
knockout monitored on top and bottom sides for easy installation
Communication relay
Control switch Release
timer