Description
- Type of the working element – Resettable (flexible)
- Type A
- Built-in isolator
- Optional protective plastic cover
- Rate of protection IP40
- EN54-11 and EN54-17 certified
SensoIRIS MCP150
| Operating Voltage Range | 15 – 32VDC |
| Consumption without communication (max) | 125μA@27VDC |
| Consumption in Fire mode | 3mA |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP40 |
| Weight | ~175g |
| Dimensions | 90x90x57mm |
Description
Attachment
Related products
1 zone fire alarm control panel
Food Processor Model Number: Eagle 1
Features
1 Fixed Zones
Supports up to 32 Detectors
Unlimited Contact Points
1 “Fire” and 1 “Fault” relay outputs 1 Monitored safer
outputs Active EOL allowing continuous monitoring of inputs Walk test LED indicator Access levels Protected by a security key, a plastic box, Abdulaziz Street Company, only for 599
Manual Call Point
Operating voltage 9 ÷ 30 VDC
Nominal operating
voltage 24 VDC
Current consumption in
alarm state
23mA/15V; 38mA/24V;
48mA/30V
Installation wires 0,4mm2 ÷ 2.0mm2
Operation temperature -10°C ÷ +60°C
Relative humidity ≤93% @ +40°C
Type of the frangible
element A
Material (plastic), Color ABS, red
Degree of protection IP40
Dimensions (incl. base) 90x57x90mm
Temperature Fire Alarm Detector
Application
The F10 is suitable for environments, where sudden large temperature changes are considered as normal, rooms with high concentration of vaporous, exhaust gases, dust, etc. For example: kitchens, garages, boiler rooms or other places where it is not convenient to install fire alarm optical smoke detectors.
SensoIRIS MOUT-240
| Operating Voltage Range | 15 – 32VDC |
| Nominal consumption during communication | 220μA |
| Relay Parameters | 4A/ 250VAC; 3A/ 30VDC |
| Max. current consumption in STAND-BY mode | 175μA@27VDC |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP40 |
| Weight | ~230g |
| Dimensions | 142x80x45 mm |