Thermo-Act Fire Extinguishing System
Thermo-Act fire suppression system
SFFECO Thermo-Act Systems is the advanced technology for automatic fire suppression systems. The systems offer a self-activating suppression system that puts out fires in seconds. It is simple to design and install with low maintenance, cost effective and reliable. Neither electrical nor pneumatic sources should be required for our thermal effect systems. The systems can be used in the presence of an increased risk of fire.
SFFECO Thermo-Act systems use fire retardant flexible tube to detect fires. Thus, the fire detection and extinguishing system is not required for detection and discharge.
SFFECO Thermo-Act systems can be designed with available commercial agents including clean agents, wet chemicals, foam, and dry powder. The system can be arranged as a direct system or an indirect system.
Attachment
Related products
FK-5-1-12 Extinguishing System
SFFECO FK-5-1-12 (UL /FM Fire Extinguishing System)
The risk of fire surrounds us everywhere today. Suppression systems are the first line of defense against all kinds of fire. Fire suppression systems avoid major break outs and also help in identifying the location of the fire.
SFFECO FK-5-1-12 Clean Agent Fire Suppression systems are safe, effective, odorless, and do not damage contents making them most sought after systems. Our extinguishing and suppression systems are certified as per standards set by UL, FM, US. EPA and are compliant to design and quality standards of NFPA 2001.
SFFECO FK5112 is a clear, colorless, almost odorless, electrically non-conductive liquid.
Our engineered system has been designed by expert engineers to extinguish fires in certain hazard areas. SFFECO FK5112 is acceptable by NFPA 2001 and can be used as an alternative to HFC227ea. SFFECO FK5112 System is suitable in places where electronic components are located such as control room. The short atmospheric lifetime of SFFECO FK5112 results in a direct global warming potential which is negligible.
Standard Fire Pumps Systems
Range
- Speed: 2900 – 3500 RPM
- Frequency 50 / 60 Hz
- Capacity 50 GPM – 1500 GPM
- Pressure Range 100 PSI – 261 PSI
Types
- Available as Self Standing Wall Mounted Base Mounted
- Configurations Available EDJ Type EJ Type DJ Type
- Pressure Tanks are available as optional
- SFFECO Control Panels are included in the package
Fire doors and frames
Fire doors and frames
As part of our continuous pursuit of innovation, SFFECO has launched its world-class fire rated doors and frames. The fire doors and frames are manufactured in a fully automated factory using CNC machines thus ensuring uniform quality and a great finish. SFFECO fire doors are manufactured to comply with various architectural requirements. These doors are designed for areas where strength, stability and durability are priorities. Typical applications include industrial building entrances, shop service doors, basement floors, stairwells, and elevator shafts. It is also widely used as partition or exterior doors in electrical and petrochemical plants. The door or frame can be made of cold rolled steel, galvanized steel or stainless steel. Doors can be used in drywall and masonry construction.
Mobile Foam Fire Extinguishers
| Model | TF25 | TF10G | TF50 | TF100 | TF35G | TFC50 | TFC100 | TFC35G |
|---|---|---|---|---|---|---|---|---|
| Capacity (L) | 25 | 37.8 | 50 | 100 | 132 | 50 | 100 | 132 |
| Effective Range | 8 m | 8 m | 8 m | 8 m | 8 m | 8 m | 8 m | 8 m |
| Discharge Duration | 19-23 Sec | 29-33 Sec | 38-42 Sec | 77-82 Sec | 100-105 Sec | 42-45 Sec | 82-85 Sec | 110-120 Sec |
| Working Pressure | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar | 12-15 bar |
EJ Type – Standard Pumps
EDJ Type Models
| Flow (GPM) | Skid Width (mm) | Skid Height (mm) | Skid Length (mm) | Motor (HP) | Jockey (HP/GPM) | Header Pipe |
|---|---|---|---|---|---|---|
| 50 | 700 | 1230 | 830 | 5.5 | 3 / 10 | 1.5" |
| 120 / 150 | 800 | 1250 | 1220 | 15 | 3 / 10 | 2" |
| 250 / 300 | 800 | 1420 | 1220 | 30 | 3 / 15 | 4" |
| 500 | 900 | 1660 | 1350 | 5.5 | 5.5 / 25 |
Fire Hose Reels & Accessories
| model | measuring | classification |
|---|---|---|
| SH19R | 19 mm | Type A, Class 2 |
| SH25R | 25 mm | Type A, Class 2 |
Fire hose reels are designed and manufactured in accordance with BS EN671 – 1. Hose reel discs are made of 1.2 mm electro-galvanized steel sheet pre-treated and coated with electrostatic powder coating and oven baked at 200°C. The side panels of the hose reel are protected with a polyester powder coating which meets the salt spray test requirements specified in ISO 9227 for 240 hours.
The hose reel drum features a configuration of hydraulically compressed ribs to give extra strength and avoid twisting. The outer edges are turned to give a secure edge treatment on the outer rims and a better look.
Automatic Fire Hose Reels are available with an internal valve built into the hose reel unit which opens during 3 turns of the hose reel as the hose is pulled out and closes when the hose is wound back onto the reel.
SFFECO Fire Hose Angle Valves (90° Pattern) are used on vertical pipes that have the inlet and outlet the same size or with the inlet larger than the outlet. The valve is manufactured according to UL668 hose valve for fire protection service standards.
SFFECO UL Listed single and double fire hoses are lined with high-tech EPDM tube whose engineered design ensures minimal weight with maximum durability and flexibility.
SFFECO UL Type Adjustable Nozzles are used on Class A and Class B fires in most industrial applications. They are used with a lined fire hose.
| model | manual | automatic |
|---|---|---|
| static type | SF 30 F-19 SF 30 F-25 | sf 30 AF-19 sf 30 AF-25 |
| Swing tube type | SF 30 SP-19 SF 30 SP-25 | SF 30 A-SP-19 SF 30 A-SP-25 |
| swing arm type | SF 30 SA-19 SF 30 SA-25 | SF 30 A-SA-19 SF 30 A-SA-25 |