Pressure Gauge
Back to products
Inspector’s Test & Drain Valve

Test and Drain Valve

Features

  •  Female NPT inlet and outlet
  •  Threaded to BS21 or ANSI B1.20.1
  •  Grooved to ANSI/AWWA C606- 11
  • BRASS ASTM C85700
  • Working pressure 175PSI
  • Grooved type available upon request
  • Cast brass valve – Optional Finishes: RB-Rough Brass
Add to wishlist
Categories: , ,
Description

Description

Description

The LIFECO Inspector’s Test and Drain valve is a combined two position lever operated ball valve, sight glass and stop valve. Test and Drain is manufactured with sight glass assembly, provides a simplified means for testing water flow alarm devices and draining of feed mains.

Attachment

Data sheet

Download

Test and Drain Valve

Related products

Compare

Manual Call Point

, , ,
Operating voltage 9 ÷ 30 VDC Nominal operating voltage 24 VDC Current consumption in alarm state 23mA/15V; 38mA/24V; 48mA/30V Installation wires 0,4mm2 ÷ 2.0mm2 Operation temperature -10°C ÷ +60°C Relative humidity ≤93% @ +40°C Type of the frangible element A Material (plastic), Color ABS, red Degree of protection IP40 Dimensions (incl. base) 90x57x90mm
Add to wishlist
Quick view
Hot
Compare

Emergency Light/Exit Light

, , , ,
Emergency-Exit-Light-LF-LED-500F Model No: LF-LED-500F Battery: Ni-Cd SC3.6V 1.5Ah Luminance Flux: 130 LM Mounting Type: Wall /Ceiling Mounted Degree of Protection
Add to wishlist
Quick view
Compare

Jockey pumps

, , ,

Features

  • Aluminum Motor Casing
  • Stainless steel parts
  • Tungsten Carbide/Graphite Mechanical seal
  • IP55 Protection
Add to wishlist
Quick view
Compare

Signal Input Module

, , ,

Features

  • Low Profile Design
  • Built-in CPU
  • Interfaces Normally Open Dry Contacts
  • ALARM FIRST! – Less than 1 second
  • Data Transfer Speed and Reliability
  • Polarized Wiring
  • LED Status Indicators
  • High Performance at Low Cost
  • Two Wire System
  • Use LF-DP-6190 for device addressing
Add to wishlist
Quick view
Hot
Compare

Twin-heads Emergency Light

, , , ,
Model No: LF-LED-600B Battery: Ni-Cd SC3.6V 1.5Ah Mounting Type: Wall Mounted Frequency: 50Hz / 60Hz Input Current: 40mA Input Power: 2.5W
Add to wishlist
Quick view
Compare

4 zone fire alarm control panel

, , ,
Model Number: Eagle 4 traits 4 fixed zones Supports up to 128 detectors Unlimited contact points 1 relay outputs “Fire” and 1 “Fault” 2 outputs Safest monitoring Active EOL allowing continuous monitoring of inputs Walk test LED indicator Access levels protected by switch Safety is a plastic box
Add to wishlist
Quick view
Compare

Gas extinguishing panel

, ,
Model Number: LF/EX Attributes Solid steel powder-coated cabinet Built-in battery and internal charger System status indicator Charge & error indicators. Battery failure Alarm circuits monitored for both open and short circuit Manual trigger switch on front 2 monitored detection zones Gas release knockout monitored on top and bottom sides for easy installation Communication relay Control switch Release timer
Add to wishlist
Quick view
Compare

Relay Output Module

, , ,

Features

  • Low Profile Design
  • Built-in CPU
  • Fast and Accurate response time
  • Feedback Monitoring
  • Data Transfer Speed and Reliability
  • Polarized Wiring
  • LED Status Indicators
  • High Performance at Low Cost
  • Two Wire System
  • Use LF-DP-6190 for device addressing
Add to wishlist
Quick view