Description
- Wall mounting;
- SensoIRIS B124 standard base mounted;
- Installation wires – 3mm²;
- Cable glands and o-ring protected sealant;
- IP65 according to EN 60529;
- Compatible with SensoIRIS wall sounders.
SensoIRIS WSB IP65
| Installation wires | 3mm² |
| Material (plastic), color | ABS, red |
| Operation temperature | -10°C ÷ +60°C |
| Relative humidity | ≤93% @ +40°C |
| Weight | ~140.5g |
Description
Attachment
Related products
Temperature Fire Alarm Detector
Application
The F10 is suitable for environments, where sudden large temperature changes are considered as normal, rooms with high concentration of vaporous, exhaust gases, dust, etc. For example: kitchens, garages, boiler rooms or other places where it is not convenient to install fire alarm optical smoke detectors.
SensoIRIS MOUT-240
| Operating Voltage Range | 15 – 32VDC |
| Nominal consumption during communication | 220μA |
| Relay Parameters | 4A/ 250VAC; 3A/ 30VDC |
| Max. current consumption in STAND-BY mode | 175μA@27VDC |
| Wire Gauge for terminals | 0.4mm² – 2.0mm² |
| Operating temperature | -10°C to +60°C |
| Protection | IP40 |
| Weight | ~230g |
| Dimensions | 142x80x45 mm |
Repeater TFT IRIS/SIMPO
| Power Supply: From the panel External power supply unit | AUX/GND (24±4)VDC |
| Maximum power consumption | 0.11A |
| Communication | RS 485 |
| Twisted pair cable UTP CAT 5: Maximum length between repeater and panel Cross Section | max. 1000m 0.5-2.5mm2 |
| Degree of protection | IP40 |
| Color, Material | Grey, ABS |
| Operation temperature | -5ºС up to +40ºC |
| Relative humidity | up to 95% (without condense) |
| Storage temperature | -10ºС up to |
